2 Stroke INFERNO IGNITIONS

yeah those companies did get the ball rolling, but i think they have lost their touch. they have useless garbage that they claim is good, but is actually rubbish. they have some good things, like the cag top ends and some pipes and stuff, but most of the rest is rubbish.

if i was to give a review, then i would rate them quite poorly as their shipping prices are about four times what they should be ($40 for a set of reeds) and their customer service is deplorable.

stick with the aussie suppliers i say. they tend to keep most of the good pbu gear in stock anyway

__________________
-SQ blata rep (47cc big bore kit, 19mm dellorto PHVB, Blata reeds, Blata crank, Zocchi Rep Pipe, 7mm reed spacer)
-911 rep (BZM 50cc 6 port top end, bzm bottom end, bzm 40cc pipe, BZM red crank, bzm gold head, BZM 18mm carb)
-D1 (50cc 5 port polini rep engine, 19mm del rep carb, bzm 50cc rep pipe)

Email:
nossta_nossta@hotmail.com

i have had an ada headkit and a pbu head kit, both are good quality domes and heads but the barrels are just chinese, yes shore the maching is good and the quality is high!! but still chinese. i think maybe in there hay day they had some good stuff! but now its just crap(lol) but i have yet to try these inferno coils so i cant say anything bad about them i have herd good things about them...

i asked about them once on this forum and someone said they give the same performance gains as putting cheetas blood on your bike.

if danny got one of these and tested it on a dyno then i might be more inclined to buy one, but i wouldnt be taking pbu's word that they work

__________________
-SQ blata rep (47cc big bore kit, 19mm dellorto PHVB, Blata reeds, Blata crank, Zocchi Rep Pipe, 7mm reed spacer)
-911 rep (BZM 50cc 6 port top end, bzm bottom end, bzm 40cc pipe, BZM red crank, bzm gold head, BZM 18mm carb)
-D1 (50cc 5 port polini rep engine, 19mm del rep carb, bzm 50cc rep pipe)

Email:
nossta_nossta@hotmail.com

My experience with the coils....we put one on a bike and my mate said he felt a difference, but it blew after one day riding. The other one we put on Walshys bike (SA guys know him) we run his bike first with the standard coil then put the Inferno on. He said he could feel a difference and watching the bike I could here it run better and could see it was going faster. The coil is still working to this day (over 1 year running)

POCKET BIKE PARTS, ACCESSORIES
$144us for a fc crank and a blata rep clutch :O

47JETTEDCARB
$52us for a ported stock carb :O

ALUMINUMSTARTERPAW
$46us for an aluminium pullstarter
$22us for an aluminium pawl
$46us for a stock pull start with aluminium pawl
:O :O :O

RACINGCLUTCH
$64us for a blata rep 2 shoe clutch :O

47cc, 49cc POCKET BIKE MOTORS
$645us for a cag engine :O :O

polini_911_high_performance_pocket_bike
$346us for a chinese 911 head kit :O:O:O

to all people that are new to pocketbikes that are thinking about buying from PBU, i advise that you start a thread asking about the product you are thinking of buying so that you can get good advice just so you dont get ripped off.

__________________
-SQ blata rep (47cc big bore kit, 19mm dellorto PHVB, Blata reeds, Blata crank, Zocchi Rep Pipe, 7mm reed spacer)
-911 rep (BZM 50cc 6 port top end, bzm bottom end, bzm 40cc pipe, BZM red crank, bzm gold head, BZM 18mm carb)
-D1 (50cc 5 port polini rep engine, 19mm del rep carb, bzm 50cc rep pipe)

Email:
nossta_nossta@hotmail.com

these prices are all ok for the U.S. buyer. but as us Aussies know, we have the goods to produce quicker race engines. RD Racing Australia has just completed a new race engine for the CAG racer that is a real screamer and we must say is also fitted with the Inferno Ignition. this is thanks to PBU. in this case.

Why not get a BZM coil from a local supplier. Gotta trust those italians. Always top quality.

__________________
The *****
49cc Aircooled Cag
JetPro Pipe - Fiberglass Reeds - Race Clutch Springs - Race fuel filter and lines - 14/14 Genuine Dellorto SHA - RD 3D Boost ported head kit

Half Fairing Banshee
BZM Clutch springs - BZM clutch Bell and Pinion - 19mm PHBG Dell Rep - GRC Kill switch - BZM orange coil - Polini Gaskets and Polini Rep head - BZM carbon reeds - port n polished - PMT T43

this BZM coil won,t fit straight on a cag.

sorry guys all inferno ignition units SOLD OUT.