first mods to do to a Watercooled Blata Replica

Hey guys,
I got this bike a while ago but didn't have time to start modding it, anways what would be the best mods to start off with, im thinking a fat boy exhaust and really not sure what else.....

A Fatboy pipe is for an A/C bike.

__________________
U R never 2 old 2 race

Yea i realised that after i posted it :cry: I need a exhaust doesnt realli matter if its a stock one or modded.... I got qouted $100 for a stock water cooled exhaust. Is there any aftermarket exhausts for the watercooled, i can't seem to find any :?

you say you need an exhaust [pipe] stock or one moded, can i ask what pipe your bike has on it now? or doesn,t it have a pipe? check out some of our sponsored dealers and ask them if they have the pipe you may need.

pipes are going to cost a lot dude you got a good bike there.

about 300 odd will get you a zochi(sp?) pipe from pocketracingbikes.biz
But check with oz mini moto first

Also do your self a favour and add tripple staged reeds - they can be gotten from about 45AUD.

The only problem with the blata rep is that there are not many performance parts for the engine. You can still upgrade (I think!!) the clutch if not then clutch shoes maybe, bell housing & bell I am sure you could - diffrent air filter perhaps, sprockets for sure, not sure about carbys tho, disc brakes you should be able to upgrade. but I am running thin here :P

you could throw in a polini engine in the frame tho or a ZPF and come racing even race it stock where are ya ?

Im in Doncaster, Victoria. It has a pipe on it right now but it's in pretty bad shape, muffler has snapped off, I actually took it in to a mechanic when he was working on my bros R1 and he had a look at it and said most likely the exhaust needs to be changed :? Right now when i turn it on it like spits out oil from near the 1st bend like when the two piped join up (just behind the radiator). I was told that might not be able to get fixed. I can take a pic to show it clearly if you want.... , i called ozminimoto and they said they dont have any pipes to fit the blata replicas, and he said he doesnt know where i could get one from :cry: i asked a bros mate who has one of these bikes and he said the stock ones are around $100ish from viperformance, so i was wondering if its worth it to just put the extra on top and get the modded ones
Cheers :wink:

ah sweet Doncaster not far from gptc at all

call danny @ http://www.pocketracingbikes.biz/ *tell him RaZ told ya to call * he has a really good pipe there - but be prepared to pay for it.
or call Cater racing - Viper might have some performance ones as well.

Check them all I say

However - are you going to race at GPTC? Check out the class rules first - if you wanna race stock ( You should coz its cheap) you need to check the rules - if you wanna race in pro get the pipe and TS reeds hell get the TS reeds anyway. Have a look at the Melbourne Mini Moto club section on the forum - trust me is hell worth it and the experince on a race day is what all pocket bikes are about

About the oil - sounds like your running your fuel mixture rich on oil? What mix are you using? 25:1 should only be used for the first 2 tanks then I'd be switching to 40:1 and then 45:1 after about 5 more tanks.