Carby clean up with pics!!

locky · #41 (**permalink**) 30-11-2007, 12:33 PM

hey RD
i am having trouble figuring out how ot get the throttle cable in and fitting it all corectly ion ym stock cag carbie i dont know how to do it ?
any i deas?

rex_hvn · #42 (**permalink**) 04-11-2008, 03:50 PM

hey guys im new here but i was wondering i want to clean the carb but i cant see any on the pics is it just my computer or cant other ppl see the either
Thanx

rex_hvn · #43 (**permalink**) 04-11-2008, 06:57 PM

nah its ok lol im now on my m8s comp and it works
just another question i have taken my carb apart before and the float on mine looks to be the other way around. on yours the float has a small little bump facing up and on mine the bump is facing the bottom of the bowl. what way is it meant to be by the way it has ever been opened before this.

rhys954 · #44 (**permalink**) 11-04-2009, 01:23 AM

thats a CAG carby isnt it??

i think i remember that one, on the inlet you can open it up a fair bit to come inline with the casting ring, use a taperd tool bit and sand it smooth - from my experience i found it worked really well - once you add the boost ports lift the exhaust slightly actually set the squish with a squish ring (and measure it using soft lead wire). this work really well with the fat boy pipe for lots of low down grunt. worked well with a 72kg rider......

oh - and dont forget to port match the damn thing, they are always so far out it isnt funny.

now if you could just do this with a delorto that would be super helpful....

elbantina · #45 (**permalink**) 06-07-2009, 12:39 AM

just wondering if the bloke b4 me put this back on the right way.. does the little metal washer go on the inside or outsideof the turning plate

thnx mark and tina