what spark plugs do you use?

hey guys, was just wondering what spark plugs you all run? (if you're willing to tell that is )

my bike's still got the factory plug on it and was told that thats a piece of crap. i'm going to change it but after doing some reading i'm left wondering what to change it to :?

i've been told to use either a (all ngk) bm6a, bpmr4a, b95egv, b8es or a br8eix????? also - which champion plugs are good? or do I steer clear of them?

now I've no idea as to which one to use (the most common one i've heard of is the 6a - and thats what most chainsaws and wippersnippers use) so any advice on what works, perfornace gains (with reference to other mods) and problems would be greatly appreciated.

cheers, andrew

__________________
don't ask to ride my bike and I won't ask to shag your missus!

I use a NGK 7ES..

ngk are the goods.
either use a bm6a or bm7a or bmp6a or bmp7a
the 6's are hotter i think
the ones with 'p' in their name are projected and slightly raise compression.
i use a bm6a...works fine.

as for mods... there are thousands of things to do. im in the middle of porting carb, head, crankcase, rejetting, custom reed setup, mods to the stock pipe and a few other things... i'll write up exactly what ive done when im finished and tested the bike. But this wont be for another week or 2. look on pocketbikeplannet.com forums....u need to sign up but the amount of info is amazing..

jamie

Rule of thumb is Stock mid range plug BM6A the higher you go in COMP the hotter you can use BUT!!!!!! Fuel needs to burn hotter as well so if your not sure mid range plugs will save detonation

Nipondenso IRW24

It's an 8 in the NGK range , but it's Iriduim so it doesn't foul.

A colder plug is better (to a point)

__________________
Comments made are my own opinion/experiences & in no way attempting to discredit those whom have previously posted there comments. I may be trying to gain any commercial advantage from my post.
regards
Stocky (Thanks LJSRULE)

I was wondering about ordering a new spark plug online, they don't have codes after the name just either Standard (STD) or the NGK ones. Does that matter?

point me in the right direction? what should i get for my one?

__________________
El Poco Loco

Stock CAG engine BM6A
Mild CAG engine BM7A

Wild CAG depends on head Kit we use an Iridium Plug B8EIX

i have a chinese big bike,... but i have a big bore kit from carter,... wat plug should i use

so the brand is NGK and the numbr is BM6A

__________________
El Poco Loco