tyre pressure??

hey ive just bought new 2 zyhongya slicks front and back with rims, axles, bearings, chain tensioners, all spacers, washers and bolts all new for $60 for the lot. from a shop in melbourne. the ones i had where trashed and had no grip wat so ever

r these tyres any good?

wats the ideal pressure for these tyres? i weigh 83kgs.

i can feel the difference in ride instantly. heaps smoother ride.

on another note. gearing for good pick up so its wants to wheelie out of corners but still has good top speed. if that is possible with a cag.
keep in mind the bike wil hav head kit, f/c crank, 14 or 15mm carby, pipe and carbon reeds.

__________________
If you dont crash, your not trying hard enough.

which shop did you get them from?
what other pocketbike stuff do they have?

zhongyas are a good budget tyre in my opinion. there are tyres that are much better, but they are cheap tyres and they are obviously working for you.
i usually pump my cag tyres up until they are firm and stay round when i sit on the bike

__________________
-SQ blata rep (47cc big bore kit, 19mm dellorto PHVB, Blata reeds, Blata crank, Zocchi Rep Pipe, 7mm reed spacer)
-911 rep (BZM 50cc 6 port top end, bzm bottom end, bzm 40cc pipe, BZM red crank, bzm gold head, BZM 18mm carb)
-D1 (50cc 5 port polini rep engine, 19mm del rep carb, bzm 50cc rep pipe)

Email:
nossta_nossta@hotmail.com

there is a gearing chart on this site type in 'sprockets and speed' into your search space
the bigger the rear sprocket the more pick up the smaller the the rear the faster
the bigger the front sprockedt the faster and the smaller the front sprocket the more pick up
as for tyre pressue it will varey from diffrent temptrues and thet amount of rubber on the track..

__________________
barnsey
aka bj#5

its called nightingales electrics. on the corner of spencer st and dudley st. they hav full pocketbikes which they arent allowed to sell complete so they r selling all parts except frames. the have a big pile of bikes upstairs. u have to take the parts off urself. the bikes r literally laying on top of each other.
they are crappy bikes pretty much. they hav the small pb's and the bigger size like x2's. havnt really paid much attention to them. plenty of tyres and rims for both tho

__________________
If you dont crash, your not trying hard enough.

do they have any watercooled stuff or is it just cag stuff?

__________________
The *****
49cc Aircooled Cag
JetPro Pipe - Fiberglass Reeds - Race Clutch Springs - Race fuel filter and lines - 14/14 Genuine Dellorto SHA - RD 3D Boost ported head kit

Half Fairing Banshee
BZM Clutch springs - BZM clutch Bell and Pinion - 19mm PHBG Dell Rep - GRC Kill switch - BZM orange coil - Polini Gaskets and Polini Rep head - BZM carbon reeds - port n polished - PMT T43

nah dont think they have watercooled stuff. its worth a look if u need any new little bits.

__________________
If you dont crash, your not trying hard enough.

might get some fairings. cag ones will usually fit banshees

__________________
The *****
49cc Aircooled Cag
JetPro Pipe - Fiberglass Reeds - Race Clutch Springs - Race fuel filter and lines - 14/14 Genuine Dellorto SHA - RD 3D Boost ported head kit

Half Fairing Banshee
BZM Clutch springs - BZM clutch Bell and Pinion - 19mm PHBG Dell Rep - GRC Kill switch - BZM orange coil - Polini Gaskets and Polini Rep head - BZM carbon reeds - port n polished - PMT T43

yeah they hav plenty of fairings. they only hav one hole in the seat to bolt on plus the front bolt. already checked them out. they r plastic. ud just hav to go throught them and get the better 1s out of the lot. sum of the engines n stuff hav been ran, sum even riden a bit.

__________________
If you dont crash, your not trying hard enough.

hey benny dude if you can find a 2nd top unit could you get it and ill buy it from yah? mines all smashed

__________________
www.demon50s.com

- BZM 6 port Banshee SHO
- Polini 911 - pro chinese for sale! PM for details.
- Pro SQ Cag

Keep them under 18psi and they should run sweet. Anything over 20psi can get a bit shakey mid-corner and anything over 22psi means you'll have **** grip.

Zhonga, easily the best china tyre. Even better when treated with tyre grip

__________________
Regards,

Gray.

MortysMiniMotos