Trouble Shooting Guide - Cags - Add yours

yeah you got to make sure of all the things are right

__________________
wear a helmet!!friend didnt in the hospitol now with a broken nose, broken skull, and cant see through one eye, and he was just riding..WEAR A HELMET



pictures of my bike:http://cgi.ebay.ca/NEW-49cc-GAS-POCK...ayphotohosting

yeah you got to make sure of all the things are right

__________________
wear a helmet!!friend didnt in the hospitol now with a broken nose, broken skull, and cant see through one eye, and he was just riding..WEAR A HELMET



pictures of my bike:http://cgi.ebay.ca/NEW-49cc-GAS-POCK...ayphotohosting

check the carby the accelleration thing in the middle might be closing instead of opening thats what happened to mine

Problem:Bike won't start/No fuel flow.
Symptoms:Bike won't start
Cause:the randoms who made the bike, happened to me bought mine from ebay, OzAuction. There was a kink in the line between the tank and the filter and the filter was put on the wrong way.
Resolution:Cut the line so it is shorter and there is no bend required for the hose to get to the filter from the hose, pull off the filter turn it around. better still toss the filter and buy a good one.
Cost:$2.00

__________________
49cc cag
Fatboy Exhaust
Fiberglass reed
Alloy Pullstart
Dellorto Replica 14/14 Carby
---------------------------------------------
If I'm too slow, your too young

conks out at high revs like running out of fuel when on full tank,

check ya fuel line make sure its not kinked, check fuel filter, clean out ya carby, clean out ya fuel thing where u turn it on and off *wink if this doesnt work then i dont know what the hell is wrong with your bike lolz

wannaplay he's not askin for help. Didnt u read the start of this thread

did u c me mention eny bodyz name?

Problem: Bike wont start (part 2)
Symptoms: Bike wont start
Cause: The Killswitch has slipped and is touching metal and causing autokill (will never start unitl kill lead is away from metal),
Resolution: Place lead back into the slot or duck tape the power lead end (not recommended)
Cost: Free! Its a DIY !

__________________
Project Dark Magician
(All parts from www.ozminimoto.com.au)
Upcoming Mods:

Black Magic Engine Kit
Blue Footpegs
Quick Turn Throttle
Fatboy 316 Exhaust
Cag Black Fairing
70 Tooth Rear Sprocket
7 Tooth US Made Pinion

= Have Now Got The Part
My Clan:

I bought a CAG for a mate of mine off e-bay that would not start....
Problem: Not enough fuel (spark plug was wet though)
Symptoms: It no START!
Cause: Blocked mainjet
Resolution: Replace jet
Cost: Around $5
Thanks to Oz-auctions for sending a complete new carby to solve the problem.

I would recommend that everyone pull the silencer off their bikes, as many of them do not have any muffler packing from new, my new B1 rep had none!
Problem: Exhaust too loud
Symptoms: Neighbors complain, people living close to the track complain!
Cause: No packing in the silencer or muffler
Resolution: Go to your local motorcycle shop and buy some packing material and pack as much as you can into the muffler.
Cost: $10.
Do this and make everyone's life easier....