How to install your triple stage reeds correctly

[Antonz]

Reckon this is Sticky Material!

[Crash Dummy]

Lets see what the results are first If there is conclusive evidence that there is any performance advantages / disadvantages I'll make this a sticky.

[KOOKY]

Both tripple reed sets I tried were the same brand.
They also out performed a big set of reeds ,PBU ?.
on the same bike

[Crash Dummy]

In theory the triple stage reeds should give the best of both worlds when it comes to reed valves. If you use thin ones you'll end up with a bike that's very responsive at low speeds but will suffer from reed flutter at high speed because the reed is too weak to spring back hard and fast enough to form a seal. Then if you run a thick reed it'll be a bit weak power wise down low then as you rev harder it'll come on better and better as it is allowed to open further. The triples open with different tension stages so you should have a really fat power band.

[KOOKY]

Sounds spot on CD

[Antonz]

mmm. I gotz a question. For the Fiberglass reed's would you install them on the "RIGHT " way or the "WRONG" way? Because there is a difference with Triple and Fiberglass reed's.

[Pocket Wog]

From my own testing ive found my engine responds better to having the tripple stage reeds setup the wrong way

[mac90]

as in triple plate angled away from the main fibre reed .
did you put the spacer in the middle or on top?

[Pocket Wog]

Yeah put the spacer on top mate

[K3vin_1990]

i have i problem with my bike, it won't stay running so i have to hold the acceleration handle if i let go the bike turns off can Anyone help me with this problem? "GSM-05 49cc samurai of ebay"