**what could it be**

[dazbbws]

hey guys!
please help me out, it will be much appreciated!

story goes... pullstarter, i go to give it a yank and sometimes it jams. now, ive opened up the starter, and it works fine.. So i put it back on, i give it another yank, it starts up! =] thinking, cool stuff, after letting it sit there puttin away, i go to rev it up, and it dies.. about half a twist that is...
so i was thinking, carbie problems? so i opened it all up, everything seems carbieish good. may it be my reeds? or timeing key? or have i broke something inside?

ive been getting stuck into it for the last couple of arvos, ...just would like some quotes to what maybe the cause to this problem.

thanks heaps!

btw, im pretty sure my bike is one of thoe china made samurai, 40.2cc
(still keeps up with thoes 49ers) x]

[ShotGun]

Check ya clutch for broken springs

[racer182]

hey dazbbws how are you mate.. im from perth too...
do you ever come down the place were we ride in welshpool...
not sure what ya problem could be but the best people to take it to
(if ya cant fix the problem) movement systems in burswood..
hey if your bike is a 40cc... like you said still keeps up with the 49cc..
i used to have a 40cc engine in my bike with a few mods..
and yeh it used to be sweet.. i think its a known fact that the 40cc engines
are a little slower down low but when they get up in the rev they seem to be
a little faster that the 49cc...
well mine was anyway...
cool mate.. hey keep in touch if you wanna know were we ride.. or if ya know
we'll seeya down there...

peace

[dazbbws]

hey shotgun! its a new clutch, about 3weeks old at that, ill go rip that apart and have a look for sure! last time, i remember when my clutch broke in half, when i went to pull start it, the back wheel will turn with the pull, and its not doing that.. hmm

[dazbbws]

racer182! im good thanks mate! yeaha my old man keeps telling me to get down to welshpool, and he says belmont or something? im keen as to race too! i met up with jordan from here, we have been for mini race of our own, he says to get down to welshpool too! so yeah id like to know more about it! thanks =]! ok, im going to start looking at the bike again shortly, btw.. where can i get new jets for my carbie and for how much?

[racer182]

yeh come down to welshpool when ya can...
what mods have you done to your bike.. and what carb
are you running....?

[dazbbws]

hahaha for i know, china, all china, ive looked at so meny items to put on, but id rather get out the old diegrinder and port a few things ^^, i really want to get into these things, ive had it for a while and im only going backwards, but im learning!

[dazbbws]

hmm.. just going go speak to some dude at movement systems ^^