Ported Dellorto?

[vwarner]

Hey everyone,
I have a 14/14 dellorto carb.
I see that you can buy a ported stock carb. It looks pretty cool.
My question is can you port the dellorto to say 15mm or 16mm, or more on the intake side?
Will it make any difference porting the intake side and not the exit side?
I dont think the ported stocker has the exit side modified.
Also, you can't actually port the exit side on the dellorto can you?
Thanks!!

[RD RACING]

if your 14/14 dellorto is the flat slide type, don,t try porting to larger internal diameters on either sides as there is not enough material ect, any excess porting will ruin this carby. you should either try larger jets or buy a 16/16 dellorto.

[Stellerlicious]

so the intakes a no no. ok. but wat bout the manifold? i look at mine from the motor side and theres the suqare manifold but also a circle were the mix goes threw, wat hapens if i match port dat?

[RD RACING]

unless you have a good quality manifold i wouldn,t touch the inners as this will weaken the manifold and break especially with the weight of the dellorto hanging on the back plus vibrations. i have seen some of these manifolds break in half.