that would easily be the best performing blata rep going around, even though wih all those mods you could say that it isnt a blata rep, its something else
__________________ -SQ blata rep (47cc big bore kit, 19mm dellorto PHVB, Blata reeds, Blata crank, Zocchi Rep Pipe, 7mm reed spacer) -911 rep (BZM engine. 50cc 6 port top end, bzm bottom end, bzm pipe. gotta love bzm!)
Now thats what you call a Blata.Looks good to.Might have to look into doing those mods to my one.Good stuff Glen.
__________________
6 bikes.
-----------
one with RD top end kit.14/14 carby,carbon 3 stage fiber reeds,zx1 pipe
one with 55cc chainsaw top end, PBU pipe
ZX1 Taipan. PBU pipe,banshee engine.
Polini clutch bell .
2 X Banshees SHO
1 fitted with polini clutch,black widow triple stage reeds
19mm del rep carby,,billet head,billet reed cage, 6/76 gearing,sava tyres
1 fitted with 50cc BZM blata engine ,21mm walbro and BZM gold crank ( dangerous now:o)
1 blata SQ roller only SRT Spooge Racing Team NTH Division
Top notch post Glen. That's so cool. Besides the mods to the motor I suppose we could all personalize our bikes to suit our size with a mig and some steel and s*** loads of time. That is certainly one thing I noticed with my sq is that she sits right down on the front wheel. I haven't taken it on the track yet but I could only imagine it's going to turn into the corner too fast. I have noticed on my test runs that it wants to fall over easily.
yeap GADGIT .the old Blata front end tuck.Know all about that.Try longer fork tubes
__________________
6 bikes.
-----------
one with RD top end kit.14/14 carby,carbon 3 stage fiber reeds,zx1 pipe
one with 55cc chainsaw top end, PBU pipe
ZX1 Taipan. PBU pipe,banshee engine.
Polini clutch bell .
2 X Banshees SHO
1 fitted with polini clutch,black widow triple stage reeds
19mm del rep carby,,billet head,billet reed cage, 6/76 gearing,sava tyres
1 fitted with 50cc BZM blata engine ,21mm walbro and BZM gold crank ( dangerous now:o)
1 blata SQ roller only SRT Spooge Racing Team NTH Division
Hey beans. Sorry for my stupidity, but is this something blata did from the design having the front end tucking right in or is this a "Chinese issue"? How do you get the tubes out from the bottom section? If your interested I found 2 other chainsaw barrels so far that will fit the pocket bike crankcase. One is another husky barrel but you have to modify a fair bit to fit and the other is from a solo chainsaw. The solo barrel is a lot less hassle to fit and certainly has better porting.
i love this website
Linear Mode
