my dreambike water pump bearing is stuffed and I'm having trouble trying to find one without having to buy the motor aswell ...! Am I able to replace the bearing in it... If so... how does it come out...?
Morty it's probably not the greatest suggestion but me personally I think when the water pump fails on my Banshee i'll be getting a better one.
I haven't had one apart yet but does the pump consist of a pully, shaft with impella and the pump is sealed and supported by a pair of ball bearings and a set of seals ? Couldn't you just replace the bearings and seals ?
I'm just sourcing an exploded diagram now.
*edit*
No luck. I've found plenty of diagrams of engines but none of the water pump so far. I'll keep you posted if i find anything.
I haven't had any luck sorry.
The ultimate solution is replacement of the standard pump with the BZM item.
*edit AGAIN*
Maylands Performance has the complete Dreambike water pump for $35
__________________ Banshee SHO - WHEELIES ARE FUN
"It is better to say nothing and be thought a fool than to open ones mouth and remove all doubt."
Last edited by Crash Dummy : 30-11-2007 at 03:07 AM.
buy the look at that morty you should be running coolant in it.Its a bit rusty looking.Being alloy you should think about that.Will do more damage if you dont.This is just a sugestion.Thats all.Like i said before some tracks dont allow it .But when you get home you should drain it and fill it with 50/50 :o)
__________________
6 bikes.
-----------
one with RD top end kit.14/14 carby,carbon 3 stage fiber reeds,zx1 pipe
one with 55cc chainsaw top end, PBU pipe
ZX1 Taipan. PBU pipe,banshee engine.
Polini clutch bell .
2 X Banshees SHO
1 fitted with polini clutch,black widow triple stage reeds
19mm del rep carby,,billet head,billet reed cage, 6/76 gearing,sava tyres
1 fitted with 50cc BZM blata engine ,21mm walbro and BZM gold crank ( dangerous now:o)
1 blata SQ roller only SRT Spooge Racing Team NTH Division
Good sugestion beans thats what i do with the coolant, To get the bearing out heat it and the casing around it wit a heat gun it will slide straight out.
__________________
!!!!!!!!!!WE ALL SIT THERE HITTING NEW POSTS!!!!!!!!!!
now thats a great idea gromet.Will have to remember that one.
__________________
6 bikes.
-----------
one with RD top end kit.14/14 carby,carbon 3 stage fiber reeds,zx1 pipe
one with 55cc chainsaw top end, PBU pipe
ZX1 Taipan. PBU pipe,banshee engine.
Polini clutch bell .
2 X Banshees SHO
1 fitted with polini clutch,black widow triple stage reeds
19mm del rep carby,,billet head,billet reed cage, 6/76 gearing,sava tyres
1 fitted with 50cc BZM blata engine ,21mm walbro and BZM gold crank ( dangerous now:o)
1 blata SQ roller only SRT Spooge Racing Team NTH Division
Last edited by beans : 30-11-2007 at 10:10 PM.
Reason: spelling
thx beans... yeah i heard ya the first time.. lol
I was given this bike a few weeks ago and like all my bikes, its being stripped down and everything replaced upgraded.... the bike was once prepped by carter racing so thats saved me a lot of time
& I have since popped out the impella and the seal... now I'm workin on removing the 2 bearings.... I'l post pics shortly..
yes bj#5. water weter will work.But you still should put some good quality coolant 50/50 in when not useing the bike.Corrosion is the concern here.NOT now,But 2;3 months down the track.Coolant also helps to lube the seal cause of the oil content.Water is not a lube.
__________________
6 bikes.
-----------
one with RD top end kit.14/14 carby,carbon 3 stage fiber reeds,zx1 pipe
one with 55cc chainsaw top end, PBU pipe
ZX1 Taipan. PBU pipe,banshee engine.
Polini clutch bell .
2 X Banshees SHO
1 fitted with polini clutch,black widow triple stage reeds
19mm del rep carby,,billet head,billet reed cage, 6/76 gearing,sava tyres
1 fitted with 50cc BZM blata engine ,21mm walbro and BZM gold crank ( dangerous now:o)
1 blata SQ roller only SRT Spooge Racing Team NTH Division
help!! leaking dreambike w/pump 
heat gun 
Linear Mode
