Hey guys i've tryed searching to no avail.
i have a 43cc piston port with a (i think) CVT transmission and i cant get the clutch bell off is there a special tool needed to get it off?
my transmission is very similar to the one in the pic,the only difference is my sprocket is facing the other way.
i also need a new clutch & clutch bell to suit from somewhere in australia if possable
the clutch looks like this
thanks Glen,
i've taken the nut off no probs just cant get the bell off
it looks like it might be threaded on
i've tryed two screwdrivers to pry it off - no luck
i also took out two of the case bolts which is threaded all the way threw
and tried to press it off by threading a long bolt threw thinking it might be stuck/tapered - no luck i also bent the bell a little it now wobbles
you need to remove the other outter plate.Take off the chain and remove the housing with the bell in it.Then remove the the sproket on the end of the bell.Then take off the circilp and you will see that its in a bearing.Get socket and tap the bell back through the bearing and it will come off.Why do you have to remove it anyway.Its not a 5 minitue job with them.Good luck.
Beans
__________________
6 bikes.
-----------
one with RD top end kit.14/14 carby,carbon 3 stage fiber reeds,zx1 pipe
one with 55cc chainsaw top end, PBU pipe
ZX1 Taipan. PBU pipe,banshee engine.
Polini clutch bell .
2 X Banshees SHO
1 fitted with polini clutch,black widow triple stage reeds
19mm del rep carby,,billet head,billet reed cage, 6/76 gearing,sava tyres
1 fitted with 50cc BZM blata engine ,21mm walbro and BZM gold crank ( dangerous now:o)
1 blata SQ roller only SRT Spooge Racing Team NTH Division
you need to remove from the opposite side of that pic.It will be in a bearing.Can you put on a pic from the other side.
__________________
6 bikes.
-----------
one with RD top end kit.14/14 carby,carbon 3 stage fiber reeds,zx1 pipe
one with 55cc chainsaw top end, PBU pipe
ZX1 Taipan. PBU pipe,banshee engine.
Polini clutch bell .
2 X Banshees SHO
1 fitted with polini clutch,black widow triple stage reeds
19mm del rep carby,,billet head,billet reed cage, 6/76 gearing,sava tyres
1 fitted with 50cc BZM blata engine ,21mm walbro and BZM gold crank ( dangerous now:o)
1 blata SQ roller only SRT Spooge Racing Team NTH Division
see pryote.You ned to support the housing and get a peice of hard wood and put it on the shaft and hit it.It will come off.Thanks for the pic.Is there a circilp at that bottom or not.
__________________
6 bikes.
-----------
one with RD top end kit.14/14 carby,carbon 3 stage fiber reeds,zx1 pipe
one with 55cc chainsaw top end, PBU pipe
ZX1 Taipan. PBU pipe,banshee engine.
Polini clutch bell .
2 X Banshees SHO
1 fitted with polini clutch,black widow triple stage reeds
19mm del rep carby,,billet head,billet reed cage, 6/76 gearing,sava tyres
1 fitted with 50cc BZM blata engine ,21mm walbro and BZM gold crank ( dangerous now:o)
1 blata SQ roller only SRT Spooge Racing Team NTH Division
Linear Mode
