Wtb: Blata Air Cooled Rep Motor Or Bike!

[minimotorider]

Anyone got a blata air cooled rep bike?
I'll buy just the motor if anyone has one

Thanks

[mac90]

i have new crankcases if you find all other parts you need
i wont part with my AC rep top ends as they are getting too hard to find,
i have almost finished throwing a hybrid AC blata engine together with the genuine top end i got from ben from WBR

i must say im very impressed with my first euro top end kit a big thanks to WBR hope your happy with your quality 40cc 4.1 rep kits + spare stocker

another thing to look out for if building up in parts there are 2 types of blata rep cases one needs coil spacers the other dose not, but the coil brackets (plate) are hard to come by

[minimotorider]

What would u like for the crankcases, Would the rest generally fit?
Like the crankcase, and genuine top end (how would it go compared to a standard blata rep watercooled with the top end).

My pull starter, clutch etc would all line up i'd assume

Thanks
Adrian

[mac90]

everything fits ;re; genuine cylinder head & piston on Chinese bottom end & crank

the genuine ac blata 3 port has a different internal design to the replica ac & the heads are not interchangeable

the genuine ac blata i have has 3 large almost square clean ports & no exhaust port bridge, really nice setup

the ac blata rep engines have the same internal design as the Chinese wc blata reps with the wide inlets with a separator & bridged exhaust port so suffer from heat problems near the exhaust bridge if they do not have the correct piston with lube hole

ill add some pics of each for you to compare if you like

[minimotorider]

that would be great. what would the crankcases set me back?
Thanks again

[mac90]

$30 plus shipping shop around u may even find them cheaper ? but i will try to match any advertised price to get rid of the ones i have, (new stock from when carter sold up)
i may have a used set ill have to look about

[unit_01]

u could buy my bike if u wanted too lol

[GLEN #159]

I have seven brand new rep barrels...

[minimotorider]

All that was written was a great help!
I do appreciate it.
If you could both pm me a price on how much your looking at that would be great.

Thanks heaps!

[mac90]

A couple of pics to show the genuine top end fits with no clearance or machining issues to the SQ & replica cases & crankshaft
SQ cases deburred & matched to the genuine Blata top end (i did taper the openings & clean up the crank lube holes)

deburred & case matched reed inlet & case
same with case side of boost port


Now once my other parts arrive WHAT TO PUT IT IN ?

ill post port comparison pics of this genuine top end & the rep

Big thanks again to ben from WBR for the as new top end