hey guys,
i have a polini 40cc 3 port engine.
it has a genuine 14/14 del, polini blue reeds, bzm reed block, polini case and crank (im not sure about the case and crank but danny says its genuine)
open to offers
i also have a replica 14/14 and a blata rep engine.
the blata rep engine comes with a genuine crank, genuine reeds, 7mm reed spacer, genuine 19mm manifold, zocchi rep pipe.
i want around $500 for the blata rep engine and pipe
i have all sorts of cag performance parts, pm me for details.
there will also be a blata rep and 2 cag rolling chassis'
cheers
__________________ -SQ blata rep (47cc big bore kit, 19mm dellorto PHVB, Blata reeds, Blata crank, Zocchi Rep Pipe, 7mm reed spacer) -911 rep (BZM 50cc 6 port top end, bzm bottom end, bzm 40cc pipe, BZM red crank, bzm gold head, BZM 18mm carb) -D1 (50cc 5 port polini rep engine, 19mm del rep carb, bzm 50cc rep pipe)
the blata rep engine doesnt have the 47cc kit on at the moment as the piston seized. i will include the 47cc barrel and head and the stock 39cc piston, barrel and head. all you need is a 47cc piston.
the crankcase has been ported heaps to accomodate the 47cc head kit
__________________ -SQ blata rep (47cc big bore kit, 19mm dellorto PHVB, Blata reeds, Blata crank, Zocchi Rep Pipe, 7mm reed spacer) -911 rep (BZM 50cc 6 port top end, bzm bottom end, bzm 40cc pipe, BZM red crank, bzm gold head, BZM 18mm carb) -D1 (50cc 5 port polini rep engine, 19mm del rep carb, bzm 50cc rep pipe)
nah it's fine, everything is in running order. it seized before i modded it so now it has a new genuine crank and has been ported. its pretty much a modded 39cc with a spare 47cc barrel and head
__________________ -SQ blata rep (47cc big bore kit, 19mm dellorto PHVB, Blata reeds, Blata crank, Zocchi Rep Pipe, 7mm reed spacer) -911 rep (BZM 50cc 6 port top end, bzm bottom end, bzm 40cc pipe, BZM red crank, bzm gold head, BZM 18mm carb) -D1 (50cc 5 port polini rep engine, 19mm del rep carb, bzm 50cc rep pipe)
if you put up a picture of this polini motor you may have a buyer can you take a photo of the clutch side of the motor and focus on the reed block ? please
__________________
WB
RACING
team riders
kenny senior a/c elite & pro cag
joel senior w/c pro and body mechanic
ben senior standard w/c and a/c elite
liam senior w/c elite, a/c elite & standard cag
tyson junoir standard cag
yeah ill try and get the camera working and ill hopefully have the pics on tonight.
none of the exterior has polini written on it (except clutch housing), danny said its because it went through ZPF so they ground it off, but he says it says polini on the internals
__________________ -SQ blata rep (47cc big bore kit, 19mm dellorto PHVB, Blata reeds, Blata crank, Zocchi Rep Pipe, 7mm reed spacer) -911 rep (BZM 50cc 6 port top end, bzm bottom end, bzm 40cc pipe, BZM red crank, bzm gold head, BZM 18mm carb) -D1 (50cc 5 port polini rep engine, 19mm del rep carb, bzm 50cc rep pipe)
Linear Mode
