Parts required SQ BLATA

[shrunk.rider]

Hey all,

Im new and I have an incomplete BLATA SQ (its got a stamp SQ in the top bar?) and need a few parts to get it going.

Its missing a fuel tank and lower hose from the engine to radiator, also the air filter is missing, I was given the bike about a year ago from a guy who didnt want it anymore and was going to chuck it out.
He told me its not been ridden in a while but he got it started and then it didnt however it still shows signs of promise like a good spark but havent been able to start it so i want to get the missing parts and get going on it.

if you guys have parts lying around that could get me going and want to sell them then please msg me.

I am ready to deal

BTW Im in the blue mountains west of sydney

http://i296.photobucket.com/albums/m.../mysqblata.jpg

[bj#5]

Ozminimoto - Mini Pocket Bikes - home

[Dazza]

Originally Posted by shrunk.rider

Hey all,

Im new and I have an incomplete BLATA SQ (its got a stamp SQ in the top bar?) and need a few parts to get it going.

Its missing a fuel tank and lower hose from the engine to radiator, also the air filter is missing, I was given the bike about a year ago from a guy who didnt want it anymore and was going to chuck it out.
He told me its not been ridden in a while but he got it started and then it didnt however it still shows signs of promise like a good spark but havent been able to start it so i want to get the missing parts and get going on it.

if you guys have parts lying around that could get me going and want to sell them then please msg me.

I am ready to deal

BTW Im in the blue mountains west of sydney

http://i296.photobucket.com/albums/m.../mysqblata.jpg

I will supply all parts required for $30.00 delivered to you.
Just send me an email for details.
sales@ozminimoto.com.au

[sharp_lines]

If it hasn't been ridden in a while it might be advisable to check the o ring on the waterpump too
When i got my bike second hand it had a seized water pump and belt.

[shrunk.rider]

Hey,

your right the waterpump wasnt turning when I cranked it after I fitted a new head and piston so I hit the kill switch.

I then used a pair of pliers in the holes to manually turn the water pump wheel and when I was turning the wheel it felt like something solid was stopping the pump from turning, with a little force i got it to turn but now water is leaking from behind the water pump wheel.

have I stuffed it? is it an easy fix

any help would be appreciated

[shrunk.rider]

Originally Posted by Dazza

I will supply all parts required for $30.00 delivered to you.
Just send me an email for details.
sales@ozminimoto.com.au

hey dazza,

my dad bought the gear from ebay for me, and made me pay up, I think he ripped me off coz your way cheaper.

I need to grab a lower radiator hose off you and some other bits


ill tell him about you and get a list over to you

thanks

[racer182]

hey shrunk....
try a place called maylands performance, there link is on
this site.
they have a full radiator hose set for under $20
its comes with all the radiators hoses you need. if your gonna
change 1 you may as well change them all.
but both ozminimoto and maylands will do parts for ya blata rep.
check them out mate.
peace

[MC RACING]

Originally Posted by shrunk.rider

Hey,

your right the waterpump wasnt turning when I cranked it after I fitted a new head and piston so I hit the kill switch.

I then used a pair of pliers in the holes to manually turn the water pump wheel and when I was turning the wheel it felt like something solid was stopping the pump from turning, with a little force i got it to turn but now water is leaking from behind the water pump wheel.

have I stuffed it? is it an easy fix

any help would be appreciated

you have to split cases to fix bearings have rusted,its possable the seal is in backwards or abuild up of corostion behind water pump shaft when you refit new bearings pack the area between bearings with rubber grease and the spring side of the seal faces in and use destilled water only

[mac90]

the water pump impeller problem is caused by lack of spacers & shims in the Chinese impeller kit
i have made my own spacers so the impeller fist snug without any play with a spacer between the bearings & as MC said pack that cavity with grease

you can also order the genuine blata impeller shim (washer) spacer kit from OZMinimoto & fix it with genuine parts
i spoke with dazza about this a couple of weeks ago & the spacers & seal, bearings are not expensive to go genuine

there is a link to the genuine blata origami manual on the forum showing a exploded view of these parts here is the link Origami B1 Service Manual

[Tz Performance]

When itz all together,chuck some Nulon Ultra Cool R45 stuff in it aswell as distilled water and it wont ever corrode again!