Clutch key... Jetting....

[razor-]

Hey.

CLUTCH
I just got a aliminum clutch off ebay with better springs cuz me stock one broke..

The clutch has a gap out of it for a key but the crank dosent...

Can i still use it??



JETTING
I got my Del'orto rep 14/14 slide carb ( Ozminimoto - Mini Pocket Bikes - Product Detail)

My bike has this head kit and f/c crank Ozminimoto - Mini Pocket Bikes - Product Detail
lightened flywheel, triple stage reeds, timing key.

What jet size would you reccomend me using?
For $5.50 a piece i dont wanna have to get many.....
Is there anywhere i can get em cheaper?

Thanks

[mac90]

the clutch is fine just put a bit of locktight on it the full circle crank's dont have a key in the clutch side same with some stock cranks

jetting a .70 or 70 is what i usually throw in them some may need a 72-75

contact hyperpocket parts on ebay he usually has full jet kits with his carbs im sure he will have a few spare kits or email dazza from ozminimoto he may have them, they are fairly cheap
or cheaper if you get the full jet kit (usually 5 or 6 different jets in the full kit)

[razor-]

yer dazza does. 5.50 each...

What jet wud it have standard??

[gromet]

68 I think

[razor-]

ok thanks.

[gromet]

woops im thinkin of a cag carb I think the dellotos r bigger

[razor-]

kk..
Would this fit?
Ozminimoto - Mini Pocket Bikes - Product Detail

Y would anybody want to jet it down to 60??

[Dazza]

The jets I have are the genuine Dell'Orto jets, hence the $5.50 each price.
I don't have the chinese copy jets, best to contact hyper for the chinese jets.

[razor-]

k thanks..

On the carb when i close the slider its not "clicking into place" like it was before..... And how do i hook the slider upto the cable???

I did but then it came undon so im guessing i done it wrong..
Also the Aluminium manifold cracked then snapped when i tightened it onto the motor!!!!!
Not happy jan

[Dazza]

Originally Posted by razor-

k thanks..

On the carb when i close the slider its not "clicking into place" like it was before..... And how do i hook the slider upto the cable???

I did but then it came undon so im guessing i done it wrong..
Also the Aluminium manifold cracked then snapped when i tightened it onto the motor!!!!!
Not happy jan

The Chinese alloy is very poor quality.
The bolt is not meant to be tightened too much.