crankcase bearings/seals

[razor-]

hey
Just pulled apart my crankcase and realised how crap the bearings in them are...

Where can i get some good ones from?? I need new crankcase seals too...

[SirHSV]

Try CBC bearings, Spillers Industrial Supplies, Repco (probably supplied from CBC anyway), or your local PB shop...

[hudson44]

You will need to measure the ID, OD and width of the bearings and quote these to the parts interpreter when ordering. The dimension of the seals are writen on them. You will have to remove the seals from the bearings as well to allow for lubrication.

If you can wait till wednesday i have some bearings and seals at work and i will measure them up and let you know.

[razor-]

yer ok that would be good..

There is no local PB shop where i am....

[hudson44]

Originally Posted by razor-

There is no local PB shop where i am....

Any auto parts store should be able to get them. You just need to quote the sizes.

[razor-]

yer but i through them out...
i kept one of the bearings but i dont have any digital calipers to measure them and i dont have the seals left...

[SirHSV]

On top of the seal you will see 3 lots of numbers, these are the dimensions of the seal you have, quote those instead and have it on hand when you go to pick up new ones.

[razor-]

i dont have the seals anymore... i threw them out..
Would any of these fit?
Pocket Bike Parts, Gas Scooter, Mini Dirt Bike and Mini Chopper Parts for sale.

[Strez]

try 6202 / p6 crank bearings 35mm od 15mm id and 15 25 7 crank seals hope that helps failing that take your crank and cases with you and they will beable to measure them up

[razor-]

how good are the bearings in the wheels?
would you suggest replacing them??