Australain Minimoto Series Information

[gtti89]

Originally Posted by Dazza

Alterartions to the rules for The Australian Minimoto Titles.
The new updated booklet can now be downloaded at:
http://www.ozminimoto.com.au/upimage...ooklet2008.pdf

Amendments that are now in place:-

JUMP START: If a rider jump starts a race, the Clerk of Coarse will issue that rider with a five (5) positions reversal from their finishing position. i.e Final finishing position in that race was position three (3) then that rider will be given position eight (8) due to the jump start.

RIDER CAUSING A RED FLAG: If a rider appears to be injured and causes a red flag, then that rider will be required to be asset by the medical supervisor before being able to continue to participate in the event. Only once cleared by the medical supervisor can the rider causing a red flag continue to participate in the event.
In the event a red flag is displayed due to an obstruction on the track, the rider causing this red flag will restart the race from the rear of the field.

BIKES & RIDERS: No bike can be changed once that bike has entered the race track previous to the start of a race. No bike can be changed once the race has begun.
Any rider not ready when called to the starting grid on time will not be allowed to start that race.

RIDER ETIQUET: A rider must not purposely lift the front wheel, skid or generally show boat during racing. They will be black flagged. No rider is to delibertly cut off another rider. During all racing a rider is to respect their fellow riders and attempt not to place their own or fellow riders safety at further risk. A protest can be lodged by any rider who feels they have been miss treated by another rider during a race if they have sufficent evidence.

BODY: Bike must have a seat fairing. Body fairing is optional, but no sharp or protruding parts of the bike are allowed.

can't argue with any of that

(big thumbs up )

[Dazza]

CLARIFICATION TO RULE 1.18
Class 1 Basic Cag


Please be aware in section 1.18 it reads as follows:

1.18 Machining: No porting, Machining (including polishing) of Barrel/head, Crankcase, Crankshaft, Con-rod, Piston or flywheel is permitted.

The organizers of The Australian Titles have been made aware of the following issue:
Some Chinese made cag bikes may have machined transfer ports within the stock engine out of the factory.
Upon investigating this possible factory modification it has been decided by all three tracks / clubs that:

All engine barrels must remain as cast, no machining of ports allowed, regardless of factory machined or not.

Thankyou

[Gnicarvisolpx]

HI Dazza,
have been looking around at the other forums on pocket bikes and came across one in nsw thats says the vic round of the Australian titles is up in the air with the withdrawl on the date to race at port melbourne what is going on. Not much was said after that.

[Dazza]

Originally Posted by Gnicarvisolpx

HI Dazza,
have been looking around at the other forums on pocket bikes and came across one in nsw thats says the vic round of the Australian titles is up in the air with the withdrawl on the date to race at port melbourne what is going on. Not much was said after that.

The Victorian round is still on, but the venue is up in the air due to insurance issue with the AKA.
The MMMCI is having an AGM on the 17th of June to decide on which way to go with it's insurance.
The MMMCI has a Plan B and Plan C in place with a possible three tracks as to run our round.
So by the end of June we will have ourselves sorted out.
Everyone will be informed on the result as soon as we decide on our insurance.
We will give you at least 2-3 months for participants to be able to organise accomodation and time off work.

[Dazza]

Item 1:
Please be aware in section 1.18 & 4.18 the amended wording is as follows:

1.18 Machining: Porting, Machining (including polishing) of Barrel/head, Crankcase, Crankshaft, Con-rod, Piston or flywheel is NOT permitted.

4.18 Machining: Porting, Machining (including polishing) of Barrel/head, Crankcase, Crankshaft, Con-rod, Piston or flywheel is NOT permitted.


Item 2:
The organizers of The Australian Titles have been made aware of the following issue:
Some Chinese made cag bikes may have have been produced with a cast boost port within the stock barrel.
As the rules do not state how many ports are allowed, the cast boost port / ports WILL be allowed within the Australian Title rounds.
Any machined ports will still be disallowed.

All engine barrels must remain as cast, no machining of ports allowed, regardless of factory machined or not.

If anyone would like to purchase this barrel, I can place them in contact with the seller if desired, as all parts in class 1 must be readly avaliable for purchase to conform with the rules.

Thankyou

[Dazza]

These cast extra boost port barrels can be purchased from BSM Trading contact is Jim or Peter on 07 3272 1196.

[GrayzWun]

Any word on the venue yet?

[Dazza]

Our insurance has been finalised to be able to use any AKA track Australia wide.
I have had the verbal confirmation from the AKA track we should be running on, but before I post up the info I will get it all in writing.
But, I will say the track we should be using is one of the best in Australia.
No bumps, no holes, smooth as a babies bum.
Around 8 meters wide, with around 6 to 8 meters + run off around the whole track.
So this is the round you all will really enjoy racing at.
The confirmed info will be release next week.

[bj#5]

Originally Posted by Dazza

Our insurance has been finalised to be able to use any AKA track Australia wide.
I have had the verbal confirmation from the AKA track we should be running on, but before I post up the info I will get it all in writing.
But, I will say the track we should be using is one of the best in Australia.
No bumps, no holes, smooth as a babies bum.
Around 8 meters wide, with around 6 to 8 meters + run off around the whole track.
So this is the round you all will really enjoy racing at.
The confirmed info will be release next week.

so we can have a round in nsw! woo

[rover]

Hi Dazza
I was wondering if you have selected where the Victorian Round of the Titles are going to be held , what dates we are looking at and when will the Nomination forms be available for that round.