Go Back   Pocket Bike Forum > Australian Pocket Bike & Club Scene > Pocket Bike Clubs and State discussion > South Australia > Adelaide Pocket Bike Association
User Name
Password


walshys home improvement sponsorship results

Adelaide Pocket Bike Association


 
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 24-06-2007, 08:37 PM
SAMMY's Avatar
Full Member
 
Join Date: Jul 2006
Location: on a bike
Posts: 780
SAMMY is on a distinguished road
Send a message via MSN to SAMMY
walshys home improvement sponsorship results

it was a great day of racing all though the numbers were down it was a great day. just like to thank walshy for lettin me ride the a/c bike and eion for letting me ride the r1, also like to thank bruce and the guys from down the track for putting on a great race meet even though unfortunately the numbers were down and when i get my bike setup watch out morgan im coming after you.
results:
junior a/c:
race 1: 1st
race 2: 2nd (crashed out)
race 3: 1st
race 4: 2nd

total 30 points 1st place overall

junior r1:
race 1: 1st
race 2: 3rd
race 3: 4th
race 4: 3rd

total 25 points 2nd place overall
__________________
49cc cag
#14 "SHREK"
mods:
  • full alloy pullstart
  • genuine Zocchi exhaust
  • Carbon Fibre reeds
  • Zhongya slicks (2 front tyres one on the rear)
  • full alloy brake levers
  • 2 piece head kit
  • Heck of alot of compression
Sponsored Links Remove This Box
  #2 (permalink)  
Old 24-06-2007, 09:14 PM
Matty_C's Avatar
Full Member
 
Join Date: Mar 2007
Posts: 227
Matty_C is on a distinguished road
sounds like it was a gr8 doy ot there sammy sounds like you did well. hey walshy if you dont mind me asking what have you got on the bike sammy rides ? cheers
__________________
Matty_C aka MC Race Engines
L7 pro cag motor got a sh1t load of mods like custom pipe,custom reed setup,16mm carby,moded reed block,mod piston,flow ported cases to work with a fcc,custom carb manifold,new spark wire,lightend fly,worked 13;1 cylender and dome.
the bike handels like a dream with a 1inch lift kit
  #3 (permalink)  
Old 24-06-2007, 09:52 PM
SAMMY's Avatar
Full Member
 
Join Date: Jul 2006
Location: on a bike
Posts: 780
SAMMY is on a distinguished road
Send a message via MSN to SAMMY
as far as i know matty its just the fatboy but the motor has always been a very quick motor
__________________
49cc cag
#14 "SHREK"
mods:
  • full alloy pullstart
  • genuine Zocchi exhaust
  • Carbon Fibre reeds
  • Zhongya slicks (2 front tyres one on the rear)
  • full alloy brake levers
  • 2 piece head kit
  • Heck of alot of compression
  #4 (permalink)  
Old 24-06-2007, 11:06 PM
RONIN's Avatar
Moderator
 
Join Date: Mar 2007
Posts: 776
RONIN has disabled reputation
Hi Maty C, the motor is an ex zuma motor out of one of there Lucky 7 bikes.
Congrats Sammy well done on your Placings.

P.S. What was Walshy results Sammy, just about to ring him, and need some ammo to pay him out LOL
__________________
Its not how fast you go that hurts, its how you decide to stop.

Last edited by RONIN : 24-06-2007 at 11:08 PM.
  #5 (permalink)  
Old 24-06-2007, 11:34 PM
Matty_C's Avatar
Full Member
 
Join Date: Mar 2007
Posts: 227
Matty_C is on a distinguished road
ohh kk hhhrrrmmm :S interesting well as long as its working all good
__________________
Matty_C aka MC Race Engines
L7 pro cag motor got a sh1t load of mods like custom pipe,custom reed setup,16mm carby,moded reed block,mod piston,flow ported cases to work with a fcc,custom carb manifold,new spark wire,lightend fly,worked 13;1 cylender and dome.
the bike handels like a dream with a 1inch lift kit
  #6 (permalink)  
Old 24-06-2007, 11:48 PM
threewheels's Avatar
Full Member
 
Join Date: Mar 2007
Location: ADELAIDE
Posts: 376
threewheels is on a distinguished road
RONIN I only saw him come off once! right un front of me! he lost the back end on the sweeper!
He definatly has better crashes at the pitts

regards
Dave
__________________
Dave Hatcliffe
APBA SECRETARY ( No skirt jokes please)
  #7 (permalink)  
Old 24-06-2007, 11:55 PM
RONIN's Avatar
Moderator
 
Join Date: Mar 2007
Posts: 776
RONIN has disabled reputation
yeah on the phone to him now..not a good day for him lol
__________________
Its not how fast you go that hurts, its how you decide to stop.
  #8 (permalink)  
Old 25-06-2007, 12:20 AM
SAMMY's Avatar
Full Member
 
Join Date: Jul 2006
Location: on a bike
Posts: 780
SAMMY is on a distinguished road
Send a message via MSN to SAMMY
yer he only fell off once but i fell off twice in the same spot (bloody footpeg) footpeg was 2 long so he got the hacksaw out and fixed that changed the gearing 2 74 but hes gonna put a 72 on it for a tiny bit more top end. other than that it was a great day for atleast 1 team member lol
__________________
49cc cag
#14 "SHREK"
mods:
  • full alloy pullstart
  • genuine Zocchi exhaust
  • Carbon Fibre reeds
  • Zhongya slicks (2 front tyres one on the rear)
  • full alloy brake levers
  • 2 piece head kit
  • Heck of alot of compression
  #9 (permalink)  
Old 25-06-2007, 12:23 AM
Maylands Performance's Avatar
Full Member
 
Join Date: May 2005
Location: Adelaide
Posts: 215
Maylands Performance
Wink

Hey Sammy
Well done today it was good to see you up there at the pointy end.!!!
I bet the finishing certificates were spread out all over the dining table tonite for everyone to see !! LOL

Cheers Brian
__________________
EAST 50s the no1 stop for Parts,Bikes and Performance Modifications www.east50s.com.au
  #10 (permalink)  
Old 25-06-2007, 12:25 AM
SAMMY's Avatar
Full Member
 
Join Date: Jul 2006
Location: on a bike
Posts: 780
SAMMY is on a distinguished road
Send a message via MSN to SAMMY
lol they sure were brian and just before i go 2 bed im might put em infront of the front door so as soon as u walk in you see em lol. tell morgan she better watch out me and walshy have this bike goin
__________________
49cc cag
#14 "SHREK"
mods:
  • full alloy pullstart
  • genuine Zocchi exhaust
  • Carbon Fibre reeds
  • Zhongya slicks (2 front tyres one on the rear)
  • full alloy brake levers
  • 2 piece head kit
  • Heck of alot of compression

 



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Walshys Home Improvements sponcership walshy30 Adelaide Pocket Bike Association 16 08-07-2007 10:53 PM
home equity loans - interest rate homegerre Melbourne Minimoto Club 0 06-01-2007 04:14 AM

» Site Navigation
» Our Sponsors
Advertise Here

» Current Poll
Do you think that weight class should be added to the 2009 Australian Tittles
Yes - 41.03%
16 Votes
No - 25.64%
10 Votes
Maybe - 25.64%
10 Votes
Would this make you more incline to race in the 2009 Australian Tittles - 15.38%
6 Votes
Would this make no difference to you racing - 17.95%
7 Votes
Total Votes: 39
You may not vote on this poll.
» Search Forums
» Online Users: 13
1 members and 12 guests
morty
Most users ever online was 314, 24-12-2007 at 11:09 PM.
» Pocket Bike Forums

» Useful Sites

Your Link Here

Powered by vBadvanced CMPS v2.2.1 (vB 3.6)

All times are GMT +11. The time now is 01:01 AM.



Car Reviews | Fast Sports Car Blog | Seat cover | Ducati Motorcycles


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.1.0
vB.Sponsors 1.0.4