| hey i'v had 3 cag pocket bikes and the easyest way i'v got my flywheel off was
1. take the middle bolt out
2. get a hamma
3. put the part were u get nails out with under the bottom of the flywheel under the little bit that sticks out under the fins. rest the top of the hamma at the bottom of the engine were the engine bolts onto the frame
4. and very gently push the handle stright down
and it should pop off in seconds..
ohh if u look at the flywheel were u'v taken the bolt out thers a rectangle part that's cut out from the hole make sure this is at about 11 o clock.. and make sure ur very carfull dont apply to much pressure cause u can easyly break something.. | 
