Quote:
Originally Posted by mac90  try a new plug first about $4 the chinese plugs that come with them are rubbish
if its not the plug could be the kill switch is shorting out (disconnect it to test), or last of all faulty coil if your gap is ok as you said |
I havent got the plug connected, im eleminating as much as i can, Ive got the coil on the flywheel and im turning the flywheel with a electric drill and holding as well as leaning the coil end up on the metal frame to see for spark, so as far as I can tell ive limited it down to flywheel and magnets and something to do with the coil.. Ive just cranked the drill realy fast and theres spark and afair bit of shock coming threw the coil but the rpm im having to use is very high, its like the coil isnt working at low rpm but will at high rpm, making it hard to start since the pull cord is slow and has alot of compression.
