24-08-2008, 01:50 AM
|
 | Full Member | | Join Date: Jun 2007
Posts: 1,221
| |
Quote:
Originally Posted by dazbbws  hey mate!
1. try taking apart your carbie and then re-assembling it, but make sure this time round, there will be no air leaks!
2. a loose spark plug will make you loose all your compession, so make sure shes tight, but not too tight.
3. as for the head, well i hope you sealed that good and proper?!
4. the ignition, make sure its not touching the flywheel, about a ATM cards distance off it is good stuff! do you have a good ground?
to check if you got spark, take out the spark plug, still conected to the lead.. put it up against the head and give your bike a pull! you want a nice blue-purple spark!
also could just be your fuel? you can kinda see this by the amount of smoke, or on the spark plug its self.. soz but ive forgoten what colour means what haha!
well i hope you get it going! if not, ask again! | nah not an atm cards width away, use a business card or a folded piece of paper. an atm card is too far away and will decrease performance
__________________ -SQ blata rep (47cc big bore kit, 19mm dellorto PHVB, Blata reeds, Blata crank, Zocchi Rep Pipe, 7mm reed spacer) -911 rep (BZM 50cc 6 port top end, bzm bottom end, bzm 40cc pipe, BZM red crank, bzm gold head, BZM 18mm carb) -D1 (50cc 5 port polini rep engine, 19mm del rep carb, bzm 50cc rep pipe) Email: nossta_nossta@hotmail.com |
