| Item 1:
Please be aware in section 1.18 & 4.18 the amended wording is as follows:
1.18 Machining: Porting, Machining (including polishing) of Barrel/head, Crankcase, Crankshaft, Con-rod, Piston or flywheel is NOT permitted.
4.18 Machining: Porting, Machining (including polishing) of Barrel/head, Crankcase, Crankshaft, Con-rod, Piston or flywheel is NOT permitted.
Item 2:
The organizers of The Australian Titles have been made aware of the following issue:
Some Chinese made cag bikes may have have been produced with a cast boost port within the stock barrel.
As the rules do not state how many ports are allowed, the cast boost port / ports WILL be allowed within the Australian Title rounds.
Any machined ports will still be disallowed.
All engine barrels must remain as cast, no machining of ports allowed, regardless of factory machined or not.
If anyone would like to purchase this barrel, I can place them in contact with the seller if desired, as all parts in class 1 must be readly avaliable for purchase to conform with the rules.
Thankyou
__________________
----------------------
Thankyou
Darren
Oz Minimoto    | 
