| CLARIFICATION TO RULE 1.18
Class 1 Basic Cag
Please be aware in section 1.18 it reads as follows:
1.18 Machining: No porting, Machining (including polishing) of Barrel/head, Crankcase, Crankshaft, Con-rod, Piston or flywheel is permitted.
The organizers of The Australian Titles have been made aware of the following issue:
Some Chinese made cag bikes may have machined transfer ports within the stock engine out of the factory.
Upon investigating this possible factory modification it has been decided by all three tracks / clubs that:
All engine barrels must remain as cast, no machining of ports allowed, regardless of factory machined or not.
Thankyou
__________________
----------------------
Thankyou
Darren
Oz Minimoto    | 
