| hi mate all the chinees bikes come with crappy fule lines so you need to change it to proper fule line you can get from go cart shop or bike shop all so you say its leaking fule is this comeing from the fule tap or from the small hose on the botom of the carby if its the fule tap then you wont get fule to your carby if this bike is a cag engine the fule tap has a small black ruber ring with 4 small holes in side it take out the ring and cut out the senter and put it back in i have taken a pic of the ring before and after now if your carby is leaking from the small hose on the botom that would be your needle and seat sticking can be cused by dirt in bowl some times the gasket on the bowl sits in to much and wont let the float rise back to the top which pushes the needle and seat closed and stops the flow of fule you can trim the inside of the gasket so that its flush with the inside of the bowl but if that all sounds to hard you can lift up your back weell and bounce it up and down that will unstick the needle and it should stop leaking
Last edited by captin grumpy : 27-05-2008 at 08:56 PM.
| 
