| Thanks everyone for the feedback. Probably start with the basics and loctite and change whatever bolts i can to high tensile ones. And also check the squish and change the wheel bearings.
Then when the engines run in might go up to the triple stage reeds, 19mm dellorto, and pipe.
Also just wanted to add Mac90 has a good point about tyre pressures, being a qualified tyre fitter, it does pay to experiment on tyre pressures as this affects greatly on handling and performance, wouldn't be the same for everyone as weight of rider and type of bike need to be taken into account, but try different settings and see what pressure is good for you.
found 18-20psi on my blata rep to be best with my zhongya slicks!
__________________
My bikes:
-
Banshee sho completely stock standard
GP3 reverse replica
19mm dell rep
fibre reeds
steering damper
"I used to be ScHiZoPhReNiC!!! But, we're o.k now".... | 
