| Me and a friend drilled out the stock jet to a .72mm size
For some reason its still responding the same,
I'm suprised though why its struggling so much with a stock carby even redrilled
The review on the right mentioned the ada 44mm head kit had no real issues running with a stock carb, and acceleration was incredible as quoted.
I am not even able to go more then 1/5th throttle, its slightly slower than a stock cag at this 1/5th (my mate is at full throttle)
I noticed the top part where the cable connects to the carby, there is a thread and a nut, i'm not sure how that should look, whether the nut should be all the way up the top of the gold thread, or the thread should be all the way in?
Would that effect it?
Its worth it going back to stock if it can't beat a standard cag | 
