| Heya Peeps.
After reading through this i bought some grinding stones & Ported my stock Carby to 18mm Venturi opening tapered down to as large as possible at the Barrel - both sides (about 13-14mm), then tapered back out to 15mm Manifold. Nobody's mentioned anything about jet sizing? What sized jet (approx.) should i use @ this size?
Thanks Guyz.
__________________
CAG
15:1 Comp Head / NGK Plug / FG Reed / 19mm Dell'orto Rep Carby with Pod Filter / SKF Bearings & Seals (CrankCase) / Alloy PullStart / Lightened Flywheel / NSK Wheel Bearings + HD Spacers (R) / SKF Bearings (F + Headstem) / 6-68 Gearing / High-Tensile Nutz & Boltz!
Soon 2 add: Fat-Boy Pipe / NOS (16oz. shot! Bigger than usual kit - LETHAL!!!) / Taller Gearing.
MY RIDE FLIES!!!  | 
