Quote:
|
Originally Posted by RD RACING if you are replacing the same type of clutch you can leave this center unit on. to remove this total you should fit a matching bolt to one of the 3 bolt holes and use one of the case ribs for an anchor so the unit doesn,t turn whilst undoing this bolt head. if you have stripped the bolt head you need to use a pair of vise grips, this tool will do this job. answer in advance to ; how do i remove the clutch unit. once this center bolt is out and you dont have a puller you can use say one of the clutch housing bolts as used by the anchor method but you must line up one of the small round lugs which are on the rib sections of inner case area [ like in pics ] this lug will line up with the fitted bolt when you turn the flywheel by hand slowly whilst watching carefully, when you found this you can then apply pressure by allen key until you hear pop, goes the unit. |
Success! I used the vice grip to get the bolt off, and i would never of thought of using another bolt to pop out the clutch unit.
cheers
