| do you think the large lug end will fit in the shoe clip ? i don,t think so. this is where a bit of common sence comes into things, but we do have worries with this. the learge lug on the eng of the cable goes to the throttle end and the small lug on the other end goes to the carby end. fit the cable to the throttle first then fit the other end passing through the black rubber boot then the spring and attach the small lug to the side of the clip, the cable will fit in the clip. when all is fitted you must test this without engine power to make sure the throttle is lifting and lowering the slide by using the hand on throttle and looking at the carbs slide as you opperate, [ leave the air filter off please] for this test then replace when satisfied. | 
